|
Most viewed
|
|
 |
How do I make a NetCam IP camera wireless?
The most popular method to turn a StarDot IP camera into a wireless device is to connect a WiFi bridge or client radio to NetCam's Ethernet port....
|
|
22 Sep, 2008
Comments: 0
|
|
|
How do I find my NetCam/Video server's IP address?
If you are running a PC running Windows, you can use StarDot Tools. Provided that you are on the same network as your StarDot device, StarDot...
|
|
16 Oct, 2008
Comments: 0
|
|
|
My DSL/Cable provider has a dynamic IP address that changes continuously. How do I access my StarDot device from the Internet if I don't know what my IP address is?
Check with your DSL/Cable provider to see if you can get a static IP address (some providers charge extra for a static IP address).
If you...
|
|
15 Oct, 2008
Comments: 0
|
|
|
StarDot NetCam SC Maximum Frame Rate per Resolution
The value after @ represents the maximum internal frame rate for each resolution. Other factors, such as JPEG frame size, available bandwidth,...
|
|
03 Feb, 2009
Comments: 0
|
|
|
How do I back focus a lens?
If your camera was purchased with a lens already installed, it was already back-focused at the factory. If you are installing a new lens on the...
|
|
03 Feb, 2009
Comments: 0
|
|
|
|
|
Recent articles
|
|
|
What size conduit should I use with Stardot Network/Power cables?
1/2" conduit. Because the Network/Power cables are pre-assembled with the RJ45 plugs and power plugs, the cable ends will be a tighter fit than the...
|
|
13 May, 2010
Comments: 0
|
|
|
Firmware 1.1.66 ChangeLog
1.1.66 - Released February 22, 2010
ChangeLog
Version 1.1.66.
h264: Show stream frame sizes in bytes (not bytes divided by 4), and...
|
|
12 May, 2010
Comments: 0
|
|
|
Firmware 1.1.65 ChangeLog
1.1.65 - Released November 6, 2009
ChangeLog
Version 1.1.65.
Update info.cgi to show "relay", and use correct values for "external_inputs"...
|
|
12 May, 2010
Comments: 0
|
|
|
Firmware 1.1.63 ChangeLog
1.1.63 - Released March 10, 2009
ChangeLog
Version 1.1.63.
[Bug #1127] Restore Zeroconf IP address configuration.
Add...
|
|
12 May, 2010
Comments: 0
|
|
|
What is the spectral response curve for the NetCam SC camera?
Spectral Response Curve for NetCam SC Cameras
|
|
04 May, 2010
Comments: 0
|
|
|
