http://stardot-tech.com/kb/ http://stardot-tech.com/kb/index.php?View=entry&EntryID=154 1/2" conduit. Because the Network/Power cables are pre-assembled with the RJ45 plugs and power plugs, the cable ends will be a tighter fit than the cable but 1/2" conduit is generally large enough (1/2" conduit has an inner diameter of at least... FAQ/General Thu, 13 May 2010 09:59:52 -0700 http://stardot-tech.com/kb/index.php?View=entry&EntryID=152 1.1.66 - Released February 22, 2010 ChangeLog Version 1.1.66. h264: Show stream frame sizes in bytes (not bytes divided by 4), and add "total sequence" size in bytes on End-Of-Sequence (EOS) interrupt. Remove h264 "expansion card"... PRODUCT SUPPORT/IP Cameras & Video Servers/Firmware ChangeLogs Wed, 12 May 2010 15:37:59 -0700 http://stardot-tech.com/kb/index.php?View=entry&EntryID=151 1.1.65 - Released November 6, 2009 ChangeLog Version 1.1.65. Update info.cgi to show "relay", and use correct values for "external_inputs" and "external_outputs" for various products. New bitware (Thu, 29 Oct 2009 23:08:40). New... PRODUCT SUPPORT/IP Cameras & Video Servers/Firmware ChangeLogs Wed, 12 May 2010 15:34:08 -0700 http://stardot-tech.com/kb/index.php?View=entry&EntryID=153 1.1.63 - Released March 10, 2009 ChangeLog Version 1.1.63. [Bug #1127] Restore Zeroconf IP address configuration. Add CONFIG_STARDOT_VIDEO_STARDOT_H 264 configuration option, and default to disabled. Add top-level Makefile... PRODUCT SUPPORT/IP Cameras & Video Servers/Firmware ChangeLogs Wed, 12 May 2010 15:32:34 -0700 http://stardot-tech.com/kb/index.php?View=entry&EntryID=150 Spectral Response Curve for NetCam SC Cameras PRODUCT SUPPORT/IP Cameras & Video Servers/NetCam SC/FAQ Tue, 04 May 2010 12:12:04 -0700 http://stardot-tech.com/kb/index.php?View=entry&EntryID=149 Yes, there are a few ways to get images through the serial port. TCP/IP via RS-232: The StarDot device can be configured to dial an ISP via analog modem, satellite modem, etc. X/Y/Zmodem: The StarDot device includes a program to... DEVELOPER Thu, 25 Feb 2010 13:22:10 -0800 http://stardot-tech.com/kb/index.php?View=entry&EntryID=148 The NetCam SC Vandal Resistant dome series and be mounted in the following ways: Wall mount with optional MNT-VWAL Surface mount on ceiling Surface mount on wall (2-axis only) 3/4" conduit ceiling mount 3/4" conduit wall... PRODUCT SUPPORT/IP Cameras & Video Servers/NetCam SC Wed, 10 Feb 2010 17:12:22 -0800 http://stardot-tech.com/kb/index.php?View=entry&EntryID=147 The StarDot DVR / NVR saves a pair of files for every one hour of recording. The STX file is the index and the SDJ file in the motion JPEG video. .stx file format The .stx files consist of multiple "struct tindexhdr" records, one per image,... PRODUCT SUPPORT/StarDot DVR Software/FAQ Wed, 10 Feb 2010 17:07:34 -0800 http://stardot-tech.com/kb/index.php?View=entry&EntryID=135 NetCam behaves like any PC when it boots up. Unless previously configured with a static IP address, NetCam waits for a DHCP server to auto assign an IP address. If no DHCP server is present, NetCam will automatically assign itself its own... PRODUCT SUPPORT/IP Cameras & Video Servers/NetCam/FAQ Wed, 10 Feb 2010 16:58:09 -0800 http://stardot-tech.com/kb/index.php?View=entry&EntryID=146 Although the NetCam series of IP cameras has an extended industrial temperature range (-40°C/F to +50°C / 120°F), there are extreme heat situations where a cooling fan may make sense. Although StarDot does not provide a cooling option, there... FAQ/General Wed, 02 Dec 2009 09:07:21 -0800 http://stardot-tech.com/kb/index.php?View=entry&EntryID=140 ... PRODUCT SUPPORT/IP Cameras & Video Servers/Express 6/FAQ Wed, 25 Nov 2009 16:13:23 -0800 http://stardot-tech.com/kb/index.php?View=entry&EntryID=141 No, because the StarDot device settings are stored in non-volatile flash memory. PRODUCT SUPPORT/IP Cameras & Video Servers/NetCam SC/FAQ Wed, 25 Nov 2009 16:12:20 -0800 http://stardot-tech.com/kb/index.php?View=entry&EntryID=144 Yes. To do this you will need to manually change a config file within the camera. Log into your camera, click on advanced within the configuration menu, then click on manual config. Within this page there will be a config file called crontab.... PRODUCT SUPPORT/IP Cameras & Video Servers/NetCam/FAQ Wed, 25 Nov 2009 16:05:54 -0800 http://stardot-tech.com/kb/index.php?View=entry&EntryID=145 NOTE: This only applies to Firmware 1.1.66 and above. If you would like to use .NET mode in Internet Explorer, you will need to add the camera's IP address to Trusted Sites. Here is how to accomplish that. First, connect to your camera in... PRODUCT SUPPORT/IP Cameras & Video Servers/NetCam SC/FAQ Wed, 25 Nov 2009 14:13:55 -0800 http://stardot-tech.com/kb/index.php?View=entry&EntryID=136 ... PRODUCT SUPPORT/IP Cameras & Video Servers/NetCam/FAQ Thu, 22 Oct 2009 10:51:17 -0700